X-9000_V3
BY EBMX
Redefine Riding
Engineered for uncompromising power, control, and
customization, the X-9000_V3 redefines what you can
expect from your electric motor bike.
Whether you are tearing up the trails, dominating
urban streets or pushing limits on the track, this
controller is built to push boundaries and unlock your
bike's full potential.
X-9000_V3
BY EBMX
Redefine Riding
Engineered for uncompromising power, control, and customization, the X-9000_V3 redefines what you can expect from your electric motor bike.
Whether you are tearing up the trails, dominating urban streets or pushing limits on the track, this controller is built to push boundaries and unlock your bike's full potential.
Power Meets Control

- 50kW Output | 1000A Phase Current | 1600A Burst
- 30 120V Infineon MOSFETs for performance and reliability under extreme conditions
- Redesigned Multilayer PCB & CNC Copper Busbars for superior thermal control

Power Meets Control
- 50kW Output | 1000A Phase Current | 1600A Burst
- 30 120V Infineon MOSFETs for performance and reliability under extreme conditions
- Redesigned Multilayer PCB & CNC Copper Busbars for superior thermal control

Next Gen Logic
- Industry-Leading 68 IO Support – Runs anything from race bikes to full featured builds
- Custom EBMX VESC Firmware with Field-Oriented Control (FOC) for silky smooth throttle control, enhanced motor control, greater efficiency
- Integrated IMU for Wheel Lift Assist – Fully programmable for launch control, anti-loop, or stunt mode
- Dual Hall Throttle Ready – Two ADC inputs, increased throttle safety and reliability.

Race Ready, Rider-Tuned
- 6 Fully Cusomizable Power Levels (Race + Street Modes)
- Graphical UI for Throttle Tuning, Regen Braking & EBMX E-Clutch
- Load & Go Battery Profiles – Over 15 plug-and-play setups
- Preloaded Motor Tunes – 30+ motors supported out of the box
- One-Touch Updates – OTA firmware & compatibility expansion

Next Gen Logic
- Industry-Leading 68 IO Support – Runs anything from race bikes to full featured builds
- Custom EBMX VESC Firmware with Field-Oriented Control (FOC) for silky smooth throttle control, enhanced motor control, greater efficiency
- Integrated IMU for Wheel Lift Assist – Fully programmable for launch control, anti-loop, or stunt mode
- Dual Hall Throttle Ready – Two ADC inputs, increased throttle safety and reliability.
Race-Ready, Rider Tuned

- 6 Fully Cusomizable Power Levels (Race + Street Modes)
- Graphical UI for Throttle Tuning, Regen Braking & EBMX E-Clutch
- Load & Go Battery Profiles – Over 15 plug-and-play setups
- Preloaded Motor Tunes – 30+ motors supported out of the box
- One-Touch Updates – OTA firmware & compatibility expansion
SPECIFICATIONS
RATED POWER
50kW
PHASE AMPS
1000A (continuous) - 1600A (peak)
CONTROL METHOD
Field Oriented Control (FOC)
OPERATING TEMPERATURE RANGE
-25 to 80 Degrees Celsius
MAXIMUM EFFICIENCY
>95%
Power. Precision. Possibility.

Supports the most powerful motors, offering plug-and-play support for:
- EBMX XLB/XUB/XTA Series, KO Motors, QS138, QS165, Sotion, Eride, Rerode, and more
- Hall & Encoder Configurations – No rewiring nightmares
Power. Precision. Possibility.

Supports the most powerful motors, offering plug-and-play support for:
- EBMX XLB/XUB/XTA Series, KO Motors, QS138, QS165, Sotion, Eride, Rerode, and more
- Hall & Encoder Configurations – No rewiring nightmares

New X-Series App
- Complete setup in minutes
- Live tuning at the track or trail
- Industry leading Technical Support
- Quicker diagnostics and expert assistance
- Future-ready, compatible with the upcoming EBMX Track Module, DC-DC and much more

New X-Series App
- Complete setup in minutes
- Live tuning at the track or trail
- Industry leading Technical Support
- Quicker diagnostics and expert assistance
- Future-ready, compatible with the upcoming EBMX Track Module, DC-DC and much more